Divid a Circle in Draw

Download Article

Download Article

There are a number of dissimilar ways to divide circle into equal parts. If you are using a pencil and newspaper, you volition need a compass to divide the circle accurately into six equal pieces. If you need to separate the circumvolve for graphic design purposes, you lot may want to employ Adobe Illustrator or InDesign. Although these programs are similar, the methods to divide the circle are unique to each program.

1. i

   Depict a circle with the compass. Align the pencil tip with the tip of the needle. Identify the point of the compass down on the newspaper. Gear up the distance between the pencil and needle equal to the radius of the circle that you would like and depict. Swing the compass around 360° to complete the circle.^[i]

   • Brand sure the swivel is tight and so it doesn't sideslip while cartoon.
   • Also make sure the pencil is deeply in its holder then it besides doesn't movement while drawing.
   • This first circumvolve is the main circle that y'all volition be dividing.

2. 2

   Draw a second circle whose center is the edge of the get-go circle. Place the needle of the compass at whatsoever betoken forth the edge of the main circle. Keep the distance between the needle and pencil the same every bit the first circle. Swing the compass around to complete the second circle.^[2]

   • The 2nd circumvolve should overlap with the starting time circle and the edge should cross through the center of the showtime circle.
   • If the distance between the needle and the pencil changes at all, the circle will not be divided equally.

   Advertizing

3. 3

   Apply the intersection of the beginning and second circle to draw a third circumvolve. Place the needle at the intersection of the first and 2d circle. There are two intersections and you tin use either one; this will be the center of a tertiary circle. Utilise the compass to consummate the third circle.^[3]

   • Once again, keep the compass at the same distance for every circumvolve you draw.
   • At this bespeak yous should accept three overlapping circles. Yous should find that the two outer circles overlap with the heart of the first main circumvolve.

4. 4

   Describe a 4th circle using the intersection of the main circle and the 3rd circle. Just as y'all did to draw the second and tertiary circle, utilise the intersection of the third circle with the principal circle as the center point. Remember, going clockwise around the circle, you volition use the intersection to the left of the circle. Place the compass on that intersection and draw a quaternary circle.^[iv]

   • You are halfway washed with drawing circles.

5. five

   Draw 3 more circles using the side by side intersection of each circumvolve. Using the intersection of the previously drawn circle with the main circle every bit the center, draw the next circle. Proceed the adjacent three circles until you lot have a total of six circles all around the master circumvolve.^[5]

   • The inside of your original circumvolve should now look like a 6 petaled bloom.

6. 6

   Utilize a ruler to draw a directly line through the center of the circle. This is the first of 3 lines y'all will need to draw to divide the circle into half-dozen parts. Every line, including this one, should cross the exact center of the circle and separate two of the half-dozen inner "blossom petals" of your drawing in half.

7. 7

   Depict another directly line i flower petal (or 60 degrees) clockwise from the commencement. This line will bisect two opposite flower petals and will go through the verbal center of the circle.^[six]

8. 8

   Depict your terminal straight line i more flower petal (or 60 degrees) clockwise from the last. Y'all now have a circumvolve divided into half-dozen equal parts.

   Advertizement

1. 1

   Depict a line through the middle of the circle. The beginning step to dividing the circle is cutting information technology directly in half. Choose a point anywhere along the circle and draw a line through the center of the circle to the opposite end. The circle is now divided into two equal pieces.

   • This method works well if you lot are trying to cut a pie or a cake.

2. 2

   Draw two more lines that divide i half of the circle into thirds. Next, you want to draw ii lines that cut the one-half into thirds. You lot tin can approximate this by dividing 1 half of the cake into three equal pieces.

   • Get every bit close to 3 equal pieces as possible. Once again, this method is just an approximation.

3. 3

   Extend those lines into the other half of the circle. Continue both of those lines through the center of the circumvolve to the opposite side of the circumvolve. If washed correctly, the circumvolve should now be divided into six approximately equal parts.

   • This method is not verbal, just is an easy fashion to divide the circle into six equal parts past heart.

   Ad

1. one

   Launch Adobe Illustrator. If you have a shortcut on your desktop, you tin open the application by double-clicking on this icon. If you don't take a shortcut, use the starting time card or search for the application and open it from the search bar.

2. 2

   Locate the Polar Grid tool. The Polar Filigree tool is i of the options in the toolbar on the left side of your screen. It is under the Line Segment grouping of tools. It kind of looks like a spider spider web; information technology is a circle with divided lines through it.

   • To run across the tools nested underneath the Line Segment, click and hold on the Line Segment tool until a window opens with more than options.
   • Click on the Polar Grid tool to activate it.

3. 3

   Click and elevate to create a circle. With the Polar Grid tool active, click on the canvas and drag the mouse to create the circle. You should see a circle appear that likely has smaller concentric circles within information technology. These can be removed later.

   • While dragging, adjust the size of the circle by dragging in and out until you reach the desired size.
   • Hold ⇧ Shift to snap to a perfect circle.
   • Keep holding ⇧ Shift and don't release the mouse click until you lot finish the next footstep.

4. iv

   Separate into parts using the arrow keys. While dragging the circle, printing on the right pointer key until you come across that the circle has been divided into 6 equal parts. If you accidentally press the key too many times, simply push the left arrow fundamental to decrease the number of divisions.

   • When the circumvolve is the size yous want and divided into 6 equal parts, you can allow go of the mouse.
   • If you allow go of the mouse likewise early on, there is an alternative method: Continue the Polar Filigree tool active (don't click back to the black pointer) and click on any whitespace in your document. An options menu will popular upward and you tin set the number of divisions to 6 and remove the concentric dividers past setting that option to 0.

   Advertizing

1. 1

   Locate the Ellipse tool and create a circle. The Ellipse tool is part of the toolbar on the left side of the screen. Information technology is a shaded ellipse. Concur downwardly ⇧ Shift and click on the white canvas, and drag the circumvolve to the size that you want.

   • Release the click on the mouse and then release ⇧ Shift to make a perfect circle.

2. two

   Identify both vertical and horizontal guides through the centre of the circumvolve. To place a vertical guide, click on the vertical ruler and drag right towards the circle. Place the guide over the vertical eye points of the circle. To place the horizontal guide, click on the horizontal ruler and elevate down toward the circle.^[7]

   • If the guides don't get properly placed the first time, you tin can click on them once again and drag them into place.

3. iii

   Locate the Polygon Frame tool. The Polygon Frame tool is located in the left toolbar underneath the Rectangle Frame tool group.^[8] Click and hold on the Rectangle Frame tool to reveal the icons underneath. The tool looks like a hexagon with an "X" through information technology.

   • Click on the Polygon Frame tool to go far active.
   • It will now be the icon showing on the toolbar.

4. 4

   Draw an equilateral triangle with the Polygon Frame tool. With the Polygon Frame tool selected, click onto the white canvas to open the options dialog box. Set up the number of sides to 3 and click okay.^[9] With ⇧ Shift held down, click and drag a triangle that is slightly longer than the radius of your circumvolve.

   • Don't release ⇧ Shift until after you allow go of the mouse click. This will ensure that yous have fabricated a perfect equilateral triangle.

5. 5

   Marshal the triangle with the eye of the circumvolve. Make sure the black pointer is selected on toolbar and click on the triangle. Elevate it to the center of the circumvolve so that the lesser-left corner snaps to the heart of the circle.

   • The correct side of the triangle should hang outside the circle with the bottom and left side of the triangle intersecting the circle.

6. six

   Join the circle and the triangle into a wedge with the Intersect tool. Highlight both the triangle and the circle. With both highlighted, detect the Intersect tool nested under Object>Pathfinder. After clicking Intersect, the circle should disappear and a wedge shape should appear.

   • This wedge is 1-sixth of the circle.

7. 7

   Re-create and rotate the wedge 60°. Highlight the wedge and correct click. Click on Transform>Rotate. Set the angle to 60° and click Copy. One time you click copy, a 2nd wedge, rotated 60° from the original wedge, volition announced.

   • Align this second wedge next to the first wedge. You will start to see the circumvolve forming.

8. 8

   Repeat the rotate and copy process until you have half-dozen wedges. Using the second wedge you just fabricated, right click again and rotate and copy the second wedge. This volition course a third wedge that y'all can place adjacent to the second. Echo this with the third, fourth, and fifth wedge until yous accept six full wedges.

   • Align each wedge next to the previous one until you lot have a perfect circle divided into half-dozen equal parts.

   Advertisement

Add New Question

• Question

  How practice I divide a circle into iv equal parts using a set square?

  

  First y'all have to find and mark the exact center of the circle. Then describe a straight line from one side of the circle through the center to the other side of the circumvolve. That's a diameter. Finally, apply the set square to draw some other diameter perpendicular to the first diameter. Y'all have at present divided the circle into four equal quadrants.

• Question

  How can I divide a circle into nine equal parts?

  

  Describe a radius. Then, using a protractor, draw eight more than radii, each 40° from the nearest radius.

• Question

  How can I divide a circle into vii equal parts?

  

  360° ÷ 7 = 51.43°. Use a protractor to depict eight radii, each approximately 51.43° from each other.

• Question

  If I wanted to cut a 6" diameter cake into 10 fifty-fifty slices using a protractor to mark the meridian edge (circumference) of the cake, how would I calculate the distance?

  

  Divide 360° past 10. That's 36°. Apply the protractor to measure 10 slices of 36° each.

Enquire a Question

200 characters left

Include your email address to become a bulletin when this question is answered.

Submit

Advertizing

Video

Thanks for submitting a tip for review!

About This Article

Article Summary 10

To separate a circle into 6 equal parts, start by drawing a line through the center of the circle starting on a point anywhere along the edge and ending at the reverse edge. Next, draw two more lines that split up half of the circle into three parts, making certain that the sections are equally equal every bit possible. And so, extend those ii lines into the other half of the circle to the opposite edges to create 6 wedge shapes. For tips on dividing a circle into equal parts using a compass, read on!

Did this summary assist you lot?

Thanks to all authors for creating a page that has been read 171,491 times.

Did this article assist you?

cookhandecand.blogspot.com

Source: https://www.wikihow.com/Divide-a-Circle-Into-6-Equal-Parts

Share this post